Home > News > Content
Steel Reinforcement Roll Forming Machine for PVC Window and Door
Nov 15, 2018

Steel Reinforcement Roll Forming Machine for PVC Window and Door Basic Info

Model NO.: LL-XB-70-9A
Steel Door Roll Forming Machine HS Code: 84552210

Steel Reinforcement Roll Forming Machine for PVC Window and Door Product Description

Detail description of  steel reinforcement roll forming machine for PVC window and door as follow:

Steel Door Roll Forming Machine Technical parameter:
1.Rolling thickness:1.0-2.0mm
2.Rolling width:40-180mm
3.Speed:5-22M/min
4.Forming steps: 9steps.
5.Steel Door Roll Forming Machine Power: 5.5KW---Electromagnetic speed motor
 Cutting power: 2.2KW
6.Working voltage 380v 50hz  control voltage 24v
7.Main forming machine use welded steel structure 
8.Transmission mode : gear wheel transmission( the material of the gear wheel use 45# steel, the surface disposed by high frequency )
9. Diameter of the shaft:70mm
9.Cutting method: Toothless saw----manual cutting, suitable for all shape,U-type,C-type,Square tube. 2 workers operate.
 
 Hydraulic automatic cutting: suitable for U and C type.One kind profile need one set cutting mould.
 
Hydraulic flying saw cutting: suitable for U type.One kind profile need one set cutting mould.
 
Steel Reinforcement Roll Forming Machine for PVC Window and Door Machine's material:
Main forming machine use welded steel structure 
Roller shaft use 45# steel, modulation disposal, the hardness of the modulation is HB250-280.surface grinding. 
Roller mould use Gcr15,salt bath quenching.hardness is HRC58-62
 
The whole production line 
uncoiler--- forming machine-- orthotics device-- cutting--recoiler--electric control box


Steel Reinforcement Roll Forming Machine for PVC Window and Door