Home > News > Content
Shutter Door Frame Steel Cold Roll Forming Machine
May 26, 2018

Shutter Door Frame Steel Cold Roll Forming Machine Basic Info

Model NO.: Door Roll Forming Machine

Steel Door Roll Forming Machine Coil Width: 198

Roller Station: 13-14

Power of Main Moter: 4kw

Power of Hydraulic: 3kw

Shaft Dia.: 70mm

Steel Door Roll Forming Machine Material of Roller: #45

Material of Cutter: Cr12

HRC: 58-60

Wall Plate THK: 16mm

Transport Package: Wooden Cases

Steel Door Roll Forming Machine Specification: CE& ISO9001

Origin: China

Shutter Door Frame Steel Cold Roll Forming Machine Product Description

Shutter Door Roll Forming  Machine

  Components for the Machine

    The roll forming machine consists of 3-ton manual uncoiler, infeed guide, fixed position driven forming stations, rectifying device, cutting equipment, hydraulic station, PLC control console, and manual unload product run out table. 

   Material of Main Equipment

Roller MaterialHigh grade S45C forged steel, coated with hard chrome.
Active Shaft MaterialHigh grade S45C carbon wrought steel, diameter 76mm.
Electric ElementsPLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter BladesptCr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.

Component and Function:

Coil Feeding EquipmentConsists of one uncoiler with capacity of 3 tons and its base. The steel sheet is manually fed to the guiding equipment under the function of friction and traction.
Infeed GuideAdopting guiding bar and sliding block (sheet lubricator) to control the width and position of the steel sheet. The coil sheet is guided in the correct position and passed to the roll forming equipment.
Mainframe TransmissionTransfer the main motor power to the rollers through cardan gear, and also transfer the coil sheet.rrect position and passed to the roll forming equipment.
Roll Forming Station-The main frame of machine is welded separately and the outside wall is connected by screw after being roto blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool. The tooling is PLC precision machined and supported with pre-lubricated rolling contact bearings.
Rectifying DeviceUsed upper 2 rollers and lower 3 rollers, to rectify the straightness of the panel after roll formed. 
Post-cut Equipmentn>Stationary hydraulic post shear/guillotine. The length and quantity of pieces can be set by the buyer through the control console, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting.
Hydraulic StationSupplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.
PLC Control ConsoleThe electric controlling system of this machine consists of five parts: operating system, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens Company of Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutualdialogue between the operator and the machine. The operation is easy and steady and can be chosen operation by manual or automatically.
Product Support TableTo support the finished run out panels. The quantity we supply is 2 pieces with length 2 meters; it can support panels with more than 4 meters in normal condition.

  Process Sketch:
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Rectifying -Cutting the panel - Panels to the supporter (option: automatic stacker).

Shutter Door Frame Steel Cold Roll Forming Machine Prodiction Sample:

Standard Equipment of Machine:

1Manual Uncoiler1set
2Infeed Guide1set
3Roll Forming Station1set
4Rectifying Device1set
5Post-cut Equipment1set
6Hydraulic Station1pc
7PLC Control Console1pc
8Product Support Table2pcs
9Spare Parts1box


We are a manufacturer in China
we can make the machine as per as your request.

About the machine,
we need you to provide us informaton,
1. profile drawing and size of product (model), 
2. steel thickness range,
3. coil width,
4. steel stress, 
5. requirements for configuration.

For price and other details, we welcome you to inquire us. 

Shutter Door Frame Steel Cold Roll Forming Machine.jpg