Home > News > Content
Roll Forming Machine for Galvanized Steel Rolling Shutter Door
May 12, 2018

Roll Forming Machine for Galvanized Steel Rolling Shutter Door Basic Info

  • Model NO.: AF-S70

  • Machine Color: as Require

  • Steel Door Roll Forming Machine Machine Weight: 5tons

  • Cutting Type: Hydraulic

  • Steel Door Roll Forming Machine Usage: Door

  • Life Long: 10years

  • Transport Package: Normal

  • Name: Shutter Slat Door Roll Forming Machine

  • Machine Size: 10.5m*1.4m*1.4m

  • Steel Door Roll Forming Machine Control System: PLC

  • Driven Type: Chain

  • Size of Container: 40gp

  • Steel Door Roll Forming Machine Specification: SGS

  • HS Code: 84552210

Roll Forming Machine for Galvanized Steel Rolling Shutter Door Product Description

Steel Profile Rolling Shutter Slate Roll Forming Machine

1. Manual Uncoiler   
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T
Inner diameter: 500-508mm
2. Feeding Table
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3. Hydraulic System
Power:4kw,Hydraulic oil: 40#hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
4.Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
5.Cutting System:
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
6.Output Table
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.
3.More pictures of the machine  

Technical Description
1Suitable Plate MaterialThickness0.6~1.0mm, Galvanized steel or Aluminum
2Working Speed8-12 meters / min
3Forming Steps27 Stations.
4Material of Roller45# steel polished and coated with chrome HRC55-60°
5Shaft diameter70mm
6Material of Shafthigh grade No.45 steel after treatment
7Driven1''Chain Driven
9Material of Cutting bladeCr12Mov, Quench HRC55-60°
10Main power5.5kw  
11Hydraulic power4kw
12Yield stress235Mpa
13  Voltage Voltage380v,3phase,50HZ

Roll Forming Machine for Galvanized Steel Rolling Shutter Door Service

Payment  type35%  T/T  prepaid  and  balance  should  be  paid  before  loading
Delivery  time30days after receving advance payment
Guarantee  period18monthes  free  service/  pay  service  all  the  machine  life 
Installation  and  trainingIf  buyers  visit  our  factory  and  check  the  machine,  
we  will  teach  you  how  to  install  and  use  the  machine,  
and  also  train  your  workers/technician  face  to  face.
Without  visiting, we  will  send  you  user  manual  and
video  to  teach  you  to  install  and  operate.
If  buyer  needs  our  technician  to  go  to  your  local  factory,
please  arrange  board  and  lodging  and  other  necessary  things.

Roll Forming Machine for Galvanized Steel Rolling Shutter Door.jpg