Home > News > Content
Rittal System Electric Cabinet Frame Base Pillar Roll Forming Production Machine
Jul 07, 2018

Rittal System Electric Cabinet Frame Base Pillar Roll Forming Production Machine Basic Info

Model NO.: BOSJ-E

Customized: Customized

Advantage: Easy to Maintenance

Electrical Cabinet Roll Forming Machine Condition: New

Electrical Cabinet Roll Forming Machine Control Type: Auto

Roller Material: Gcr 15

Making Machine: Multifunctional

Electrical Cabinet Roll Forming Machine System: PLC

Name: Rittal System Electric Cabinet Frame Base Pillar R

Electrical Cabinet Roll Forming Machine Thickness: 1.0-1.5mm

Transport Package: Wooden Cases

HS Code: 8455212000

Rittal System Electric Cabinet Frame Base Pillar Roll Forming Production Machine Product Description

Rittal System Electric Cabinet Frame Base Roll Forming Production Machine Indonesia


1 parts of equipment
   
The whole line consists of de-coiler system, punching system, forming system,cutting system,electrical control system ,etc


3.main technical parameters
3.1Passive de-coiler
Inner expansion type, max. loading 2ton
Inner diameter: ¢510mm, outer diameter: 1200 mm
 
3.2 leveling and feeding section
Correction roller: up 4/ down 5
Leveling range: max. width of the sheet 220mm, max. thickness 1-1.5mm.
Feeding machine is servo-feeding machine
 
3.3 continuous hole punch section
Punching type: four columns hydrauic punch
Material of the punching mould: Cr12
 
3.4  main roll forming machine
Forming station: 21stations
Wall type with chain drive system
Max. feeding width is 220mm
Diameter of the roller shaft: ¢60mm,material is 40Cr
Material of the rollers are GCr15, full quenched treatment, hardness HRC56-62o
(two sets of rollers for different two profiles.)
Motor power: 22kw(11w X2 )
 
 
3.5 Cutting system is flying saw cutting system
 

6,Electric control panel: PLC control system
  
 

4,Main Machin Technical Parameter

 
No.
 
Name
 
unit
 
parameter
 
remark
 
1
 
Suitable raw materials
 
type
  
Mild steel, galvanized sheet
 
 
Plate strength
Map≥350 
 
Plate thickness
mm1.2~2.5 
2 
specification
mm       
See the picture
 
3 
speed
m/min6~8 
4 
Material of the roller
  
GCr15,Hardening treatment
 
5 
drive type
  
Gear box
 
6 
power
kw 
About45
 
7 
Electrical control system
  
PCL frequency control
 
8 
Size(lengthX widthXheight)
m35X4X3.9 

 

Our expertise for your energy

The efficiency of any system powered by renewable energy depends to a large extent on whether the energy can be stored. Only then will it still be possible to use the power generated even if the wind is not blowing, the sun is not shining or there is no biogas available. Rittal has the right system solutions to meet these storage tasks, be it for a photovoltaic system in a private residence, or an industrial-scale solar farm.

   

Rittal System Electric Cabinet Frame Base Pillar Roll Forming Production Machine Compact and effective:

  • Wall-mounted enclosures and oor-standing enclosures with high protection categories and international approvals

  • Congured with heavy-duty shelves and 482.6 mm (19) system technology

  • Perfect, efficient climate control - with climate control components precisely tailored to your required output. From simple fan-and-lter units, to cooling units, to chillers with a cooling output of up to 450 kW.

 

 Modular and exible:

  • Bayed enclosure systems support exible, innite baying

  • High protection category and international approvals

  • UL-tested busbar systems

  • Optimum climate control even at high heat losses

  • Perfect integration into a standard container if required

 

Reliable distribution:

  • ISV distribution enclosures for reliable power distribution at all building levels

  • Design verication to IEC 61 439

  • Choice of devices from many different manufacturers, including: ABB, Eaton, General Electric, Mitsubishi, Schneider Electric, Siemens and Terasaki



Electrical Cabinet Roll Forming Machine.jpg