Home > News > Content
Electrical Cabinet 9/16 Fold Profile Rack Roll Forming Machine
May 17, 2018

Electrical Cabinet 9/16 Fold Profile Rack Roll Forming Machine Basic Info

Product Description

  • Model NO.: standard

  • Electrical Cabinet Roll Forming Machine Vertified: Ce, ISO9001:2008

  • Transmission: Worm Grear Box

  • Specification: CE, ISO9001: 2008

  • Electrical Cabinet Roll Forming Machine Size: 25*1.5*1.5

  • PLC: Mitsubishi


Electrical Cabinet  9//13/16 Fold Profile Rack Roll Forming Machine ,
 This machine use to produce cabinet rack,such as 9 /13 /16 fold profile, enclosure steel frame,multi fold section for panel, from a coil to finished product only finished by one production line, the machine line has 3in1 equipment which has de-coiler for coil hold, leveling machine for making coil sheet flat, and then use servo feeder to feed sheet length to punching machine as PLC program setting, hydraulic or mechanical punching machine has several individual cyliner which could be seperately controlled by PLC, so it's easy to achieve punching any hole or slot or notching at any length side of sheet. After finish holes punching on sheet, then Roll forming machine will forming the profile as the drawing requirement step by step. After profile forming there has straightening device for adjusting the straightness of finished product. And then using servo cutting device to cut your length,finally stand tables ready for packing.
   It is full automatic machine line and quite easy to use it, only require 3 people for operation.
 
??? Electrical Cabinet 9/16 Fold Profile Rack Roll Forming Machine Product Information:


Profile Drawing

 
customize your shape and size

Tolerance
Profile Section:±0.5mm
Cutting Length:±1.0mm
Hole Distance±0.1mm
Straightness:1.0mm/M
Twist:1.0mm/M
Bend:1.0mm/M
Material InfoType:Cold Roll Steel Galvanized Steel
Thickness:1.5mm~2.5mm
Yield Strength195Mpa
Maximum Width<350mm


 
???  Machine Layout:
 
  ??? Electrical Cabinet Roll Forming Machine Machine Components:


    1.   

3in1 Machine [De-coiler+Leveling+Servo Feeder]

     1 set
    2. Hydraulic & Mechanical Punching Machine     1 set
    3.Roll Forming Machine     1 set
    4.Straightness Device     1 set
    5.Servo  Cutting Machine     1 set
    6.Hydraulic Station     1 set
    7.Computer Control Box     2 sets
    8.Product Stand Tables     2 sets
    9.Punching Molds     1 unit
   10.Tool Box     1 box   


 
??? Electrical Cabinet Roll Forming Machine Machine Specification:


3in1 machine
Coil ID:508mm
Coil OD:1200mm
Coil weight:2tons 
Voltage:380V AC 50HZ
Maximum Speed:16m/min
Feeding precision:                     ±0.1mm   
Straighten Roll:Upper5/Lower4
Feeding Roll:upper 1/lower 1
Expansion type:                             Hydraulic
Punching MachineDesign Technology:From Australia JD Machinery
Structure:4 Columns
Mold Material:Cr12Mov
Mold Treatment:Heat treatment, HRC58~62o.
Cylinder:Indivicual Seperately Move Function
Control System:PLC control


Electrical Cabinet 9/16 Fold Profile Rack Roll Forming Machine.jpg