Home > News > Content
2 Waves&3 Waves Highway Guardrail Roll Forming Machine
Jun 13, 2018

2 Waves&3 Waves Highway Guardrail Roll Forming Machine Basic Info

Model NO.: YX80-310

Trademark: naxuan

Origin: Shanghai

2 Waves&3 Waves Highway Guardrail Roll Forming Machine Product Description

Composition of the machine
1. Simple Decoiler/ 5T Hydraulic Decoiler(optional)
2. Feeding→Flatten→Punching→ Forming Station→Post Cutting
3. Output Table
4. Hydraulic Station
5. Control Desk
6. Spare Part List
Technical Parameters
Simple Decoiler (Quantity: 1)

Capacity: 3T      I.D: 508mm          O.D: 1300mm
5T Hydraulic Decoiler (Quantity: 1)

Capacity: 5T      I.D:508mm           O.D:1300mm
Feeding (Quantity: 1)
Feeding Type:                    adjustable
Feeding Width Range:             660-800mm
Dia. of Entrance & Guide Roller:     ¢65mm
Material of Entrance & Guide Roller:  SAE1045, HRC48-52°
Flattener (Quantity: 1)

Flattener Roller:               4 upper rollers, 5 lower Stations (9 rollers in total)
Flattener Roller Material:          SAE 1045, HRC 48-52°
Dia. of Flattener Shaft:            ¢76mm,
Material of Flattener Shaft:        SAE 1045, hardening & tempering
Punching (Quantity: 1)

(NOTE: This machine needs two units of hydraulic punching system. The whole punching operation should be automated and controlled by the installed program (in the operator's console).
Hydraulic Power:                  22kW
Working Pressure:                 18-24mpa

Forming Station (Quantity: 1)

Thickness Range:                2.4-3.2mm
Max Production Speed:            at least 10m/min (excluding cutting)
Main Motor Power:              30kw, AC Motor
System Voltage:                 380V, 50Hz, 3Phase
Roll Station:                    20 Stations
Roller Material:                 GCR15 Steel, 58-62 Degree ,CNC
Shaft Diameter:                 ¢90mm
Shaft Material:                 SAE1045 
Machine Color:                 blue & yellow (or based on customer's request)
Post-Cutting (Quantity: 1)
Cutting Type:                   hydraulic (connected with the punching hydraulic unit)
Cutting Power:                  15KW AC Motor
Hydraulic Working Pressure:       12-16Mpa
Cutting Motion:                 the roll forming part is non-stop when cutting
Material of Blade:               Cr12 (heat treatment)
Length Measuring:               Automatic Encoder Length Measuring
Tolerance of Length:              +/- 1.5mm Each Piece End Product
Color:                          Blue, Cylinders In Red
Output Table (Quantity: 3 Units)

Total Length after Assembly:        At Least 12,000mm
Length x Width x Height:           2.0m x 0.6m x 0.9m
Supporter Roller:                 ASTM 1045 with Chrome
Dia. of Rollers:                   55mm
Color:                          blue (or based on customer's request)
Hydraulic Station (Quantity: 1)

Hydraulic Power:                 15kw
Working Pressure:                12-16mpa
Solenoid Valve:                  6 Groups (1 for pre-cutting and 5 for punching)
Hydraulic Oil:                    46# Hydraulic Oil
Color:                          blue (or based on customer's request)
2 Waves&3 Waves Highway Guardrail Roll Forming Machine Packing:
1. 1- 40' container and 1- 20' container for loading one set of machine with mechanical decoiler. 
2. Main machine body and decoiler is load naked (tighten to container with steel wire rope). 
3. Spare parts and operating tools are loading in tooling box.

Why us?
1.  Manufacturing roll forming machine since 2009
2.  With ISO,SGS,BV and CE certificate
3.  1 year quality warranty
4.  Introduced Mitsubishi PLC with touch screen. Friendly man-machine interaction.
5.  Technician can be sent to your factory to install the machine and train your workers
6.  Export to more than 20 countries. 

2 Waves&3 Waves Highway Guardrail Roll Forming Machine.jpg